I miss Illuminations so much. My favorite part of the show was always when the preshow music transitioned into the famous speech which ended with the torches being blown out. It took me months to design, but I figured out a way to capture this magic so you could bring it into your own home.

The video is the most important part of this listing so please follow this link to view it. Please ensure you watch the video to the very end for the full effect! https://vimeo.com/459946949

As you can see, once you press the button, the LED flame starts flickering as some of the preshow music plays. You’ll hear a section of two preshow songs followed by the entire Reflections of Earth speech, finishing with the narrator blowing out the flame!

**I now offer a way to customize and personalize your soundtrack after you receive your torch at no extra charge!**

This model is actually quite large. It stands 16″ high from the base to the tip of the flame. The base is 3″x3″ and is designed for stability. The entire model is 3D printed in thermoplastic with a high density for strength. ​​This is a truly unique collectible as it’s the only one of its kind that includes a flickering LED flame, sound, and automatic flame shutoff when the host blows out the flame!​​

The model uses a 1100 mAh rechargable battery for power. This battery was selected for its longevity so you can use the model wirelessly for a long period of time without recharging. It comes with a charging cable to plug into any AC outlet. There is a handy LED on the circuit board which remains green during charging and turns off when the battery is completely charged. This model will NOT work while it’s plugged in and charging. You can place it anywhere you want since it’s completely wireless!

All electronics are self contained and sealed inside the electronics box which also houses a downward firing speaker for maximum sound clarity.

We also offer a USB stick with many EPCOT/Hollywood Studios night shows including Illuminations! https://www.etsy.com/listing/1336003815

I offer free curbside delivery within 1 hour of Ocoee, FL to get your torch to you quicker and to reduce the risk of shipping damage.

This model is not a toy and should be treated as a collectible art piece. Since it is 3D printed, printing artifacts will be visible when viewed up close.

**We package all of our items with extreme care but there is always the chance that they could get damaged due to improper carrier handling. Rest assured, the items are fully insured and we can resolve handling damage very quickly**

This item is not affiliated with the Disney Company in any way.*This item is meant for indoor use only and should be kept away from prolonged, direct sunlight which could warp and fade the PLA plastic*

You will receive the following:
*Full dual color castle with 6 flickering LEDs and one flower bed out front.
*Stone colored stand (castle is permanently glued to stand) with bushes.
*Complete onboard audio with push button and rechargeable battery
*Charging cable to recharge the battery

Check out the castle in action below!

This castle is quite large at 10″ tall by 8″ deep by 12″ wide! It’s completely wireless and can be placed anywhere.

The battery lasts a very long time and can be easily recharged once it runs out of power. The circuit board sticks out the back 0.5″ to allow for easy charging.

Please note that the bottom of the stand is purposely left open so the electronics are exposed in case any repairs are needed in the future.

We fully insure all of our shipments in order to protect from shipping damage. We also offer free, hand delivery in the Orlando area.

This item is not affiliated with the Warner Brothers company in any way and is considered fan art.

*This item is meant for indoor use only and should be kept away from prolonged, direct sunlight which could warp and fade the PLA plastic*

You get Mickey, Minnie, Donald, Daisy, Goofy, Pluto and, since every good story has a villain, Pete!

Put the entire lamp on a cheap, rotating turntable from Amazon and you will be able to see it in glorious 360 degrees while it rotates!

Due to the detail, this print actually takes a whopping 92 hours just for the sphere and another 17 hours for the stand!

This lamp is completely wireless and comes with a remote. The remote allows you to chose from 16 different colors to match your preference. You can also chose cool features like flash, strobe, fade, and smooth which allow the lamp to cycle through many colors/modes automatically. It’s very easy to place this lamp across the room and control it from the comfort of your couch, chair, or bed. You also get a black stand which houses the lamp and supports the sphere. The entire fixture is 1 foot high!

The included batteries should give you between 15-20 hours of continuous light. You can easily swap out the AAA batteries for rechargeable batteries if you’d like.

Both the lamp and remote have batteries included with purchase.

Since it is 12″ high and 8″ in diameter, it’s pretty large (but extremely light) so keep that in mind.

The image I used is also attached in the listing for reference.

**We package all of our items with extreme care but there is always the chance that they could get damaged due to improper carrier handling. Rest assured, the items are fully insured and we can resolve handling damage very quickly**

This item is not affiliated with the Disney company in any way and should be considered fan art.

Crafted with precision and attention to detail, this sign features Mickey Mouse prominently displayed, along with a reference to the iconic Silly Symphony cartoons. The 3D printing process ensures that the colors are vibrant and true to the original design, while also providing a durable and long-lasting product.

Measuring 6.5″ Wide x 5″ High x 1/2″ thick, this sign is the perfect size for displaying in your home, office, or Disney-themed room. You can add a magnet, Command Strips, velcro, or anything you can think of to the back to make this a really versatile piece! The combination of classic design and modern 3D printing technology makes this sign a true collector’s item that is sure to become a treasured piece in your collection.

Each sign is carefully printed to order and shipped directly to you, ensuring that you receive a high-quality product that meets your expectations. Don’t miss your chance to own a piece of Disney history with this beautiful and iconic sign. Order yours today and bring a little piece of the magic home!

This sign is meant for indoor use only and should be kept out of direct, prolonged sunlight exposure in order to avoid warping.

This item is not affiliated with the Disney company in any way and is considered fan art.

Elevate your Disney passholder experience with our stunning Oversized, Colorful 3D Printed Signs, inspired by the beloved Disney Passholder magnets. These enchanting signs are available in five delightful characters: Mickey, Minnie, Donald, Goofy, and Pluto.

Each sign is almost double the size of the original Passholder Magnet at a whopping 6.5″ in diameter by 0.5″ thick!

Magical Design: Each sign is intricately designed to capture the essence of the iconic Disney characters. From Mickey’s cheerful grin to Minnie’s elegant hat, every detail is crafted with precision to bring a touch of enchantment to your space.

Vibrant Colors: The signs are brought to life with a rich and vibrant color palette, ensuring they catch the eye and add a burst of Disney-inspired charm to any room or setting.

Quality Materials: Crafted from high-quality 3D printed plastic, these signs are built to last. They are durable and lightweight, making them easy to hang on walls or display on shelves.

Easy to Display: Simply add your own adhesive strips or magnets for easy, damage-free hanging.

Collect Them All: Don’t limit yourself to just one character – why not collect them all? Mix and match your favorite Disney pals to create an extraordinary gallery wall that showcases your love for all things Disney!

Experience the wonder of Disney with a twist of modern craftsmanship. Shop now and add a dash of pixie dust to your surroundings with our Oversized, Colorful 3D Printed Signs modeled after the cherished Disney passholder magnets. Embrace the magic and celebrate your love for Disney characters like never before!

BULK DISCOUNT COUPON CODES!

Use code ‘Passholder10’ to get 10% off 3 or more Passholder signs

Use code ‘Passholder15’ to get 15% off 5 or more Passholder signs

This product is only inspired by Disney characters and is considered fan art. This product is not affiliated with the Disney company in any way.

**Due to the nature of 3D printing, there may be small imperfections when viewed up close. Examples include small pixels of color, tiny gaps, etc.**

Do you love Happily Ever After as much as I do? Does the sight of Cinderella Castle just get you every single time? Have you ever wanted to bring the castle home and recreate the amazing feelings you get while watching an incredible Disney night show? Well then, I think I have the perfect package for you: Cinderella Castle Projection Package! You only need to add the suggested projector and you’ll have everything you need! You get an absolutely massive 18″ tall Cinderella Castle (designed by the incredible artist Alex Corrao) complete with detailed trims, bricks, spires, and you even get the beautiful bushes and flowers that you see in the pictures (note that flower colors may differ from picture). But that’s not all, you also get the entire Happily Ever After fireworks show which is ready to project on your castle and backdrop using the recommended projector (purchased separately)!

Not enough for you? Do you miss Wishes and that incredible soundtrack like I do? Well, you get that complete show too! Miss HalloWishes? You get it! Love Minnie’s Wonderful Christmastime Fireworks? You get it? Curious about the Enchantment show with all of it’s gorgeous projections? You get it!

We now offer a gorgeous 5 color version and our standard gray version. Check out the color version in action!

Please note that I no longer include the projector with this package since I want you to be able to buy it directly so you can claim the warranty, earn credit card points, etc. I will provide you with instructions on how to use the suggested projector, placement distances, etc. For budgeting purposes, this projector typically sells for $470 but can sometimes drop as low as $400. I can only guarantee this package with the exact projector I reference but many customers have used their own projectors with huge success. Here is a link to the projector: https://tinyurl.com/capsulemax. For maximum clarity, I recommend the upgraded 1080P laser projector which can be purchased for ~$600-$700: https://tinyurl.com/NebulaLaser . This is the projector that was used in the color castle video linked above.

Please take a few measurements of your intended display area before reading further. Ideally you will want to place the castle and projector on the same flat surface. The castle should be flush against a flat wall or projection screen. The wall can be textured like the one in my video. A flat wall is even better. Depending on the show, the projector will need to be placed at various distances from the castle in order for the scale to work perfectly. The closest show is Wishes where the front of the projector will be ~44″ from the front of the castle base. The farthest show is Enchantment at 56″. Ideally, the castle and projector will be on the same, flat surface so a long table is best. However, the projector has a threaded hole on the bottom which allows you to mount it on a tripod if you choose to have that setup instead. I have one customer that keeps the castle on a floating wall shelf and only brings the projector out on a tripod for the shows.

The brand new 32 GB USB stick will come loaded with all of these shows in High Definition ready for you to recreate some beautiful memories at home:

-Wishes – 15 minutes 28 seconds
-Happily Ever After – 19 minutes 58 seconds (including ambient after-show)
-HalloWishes – 11 minutes 35 seconds
-Minnie’s Wonderful Christmastime Fireworks – 12 minutes 19 seconds
-Enchantment – 16 minutes 41 seconds
-We are now including a bonus show: Celebrate the Magic!!

Here are some more details so please read carefully:

The Castle will come in 3 pieces which make it easier to ship and gives you flexibility on how you want to display it.
Top half – consists of most of the spires and is made from 2 smaller pieces. You will see a small horizontal seam where these 2 pieces join but it becomes invisible from far away and can’t be seen during the projection shows
Bottom half – printed in one, continuous piece. The top half slides right on top of the bottom half. You can choose to super glue these two pieces together once you receive the model
Base – now printed in one, continuous piece with no seams. The base comes with the bushes and flowers glued on. You will need this base for all of the projection shows since it helps to elevate the castle. However, you may choose to display just the castle without the base when not projecting.

Please observe in the pictures that the entire back portion of the castle and base are completely flat. This is by design so you can push the castle flat up against your wall for projecting.

Please note the maximum size of the projected image behind the castle is 27″ high x 48″ wide. Please make sure you have enough room on your chosen projection surface.

The projector that I suggest has incredibly crisp HD images and includes a 360 degree surround speaker! This was a very important feature since you will not need an external speaker. However, if you choose to use a more powerful speaker, this projector has the ability to pair with another Bluetooth speaker to make the sound even more immersive! Contact me for projector suggestions.

For the fireworks projection shows, you will need to play them through the included USB stick which must be plugged into the projector. However, if you are tech savvy, it would be easy for you to copy the projection shows to a home server and stream directly to the projector. This would avoid the need for the USB stick. If you choose the upgraded laser projector, you will need to purchase a USB-A to C adapter which can be found for ~$6.

You will receive instructions in the box on how to setup and play each show.

We also offer just the fireworks projections on USB stick without the castle: https://www.etsy.com/listing/1297383503

**We package all of our items with extreme care but there is always the chance that they could get damaged due to improper carrier handling. Rest assured, the items are fully insured and we can resolve handling damage very quickly**

This item is not affiliated with the Disney Company in any way.*This item is meant for indoor use only and should be kept away from prolonged, direct sunlight which could warp and fade the PLA plastic*

This pieces is modeled after the actual building that used to sit outside the attraction near the entrance to Adventureland. This piece is hand-painted and each model takes about 5 hours of painting over multiple days.

Copy and paste this link into your browser to see the model from all angles! https://vimeo.com/791280211 (please note that there is no audio with the actual model).

The model is compact and can be displayed almost anywhere.

We also offer a Splash Mountain Sign: https://www.etsy.com/listing/1393792031
We also offer a Full Scale Model of Splash Mountain! https://www.etsy.com/listing/1314082330

This item is not affiliated with the Disney company in any way and is considered fan art.

We all love the Mandalorian and we simply cannot forget little Grogu! This model is designed to represent Mando on a mission. He is in mid-stride and his enormous cape is blowing in the wind. He has his Amban phase-pulse blaster strapped to his back and his pistol in his right hand, ready for action. He even has his whistling birds ready to go on his left wrist! He’s carrying plenty of ammo and is outfitted in his finest Beskar steel armor. Naturally, he’s carrying Grogu in a pouch where he can always be protected.

The video is the most important part of this listing since it lets you listen to the audio from the model and see the lights in action so please follow this link to view it:

The video only shows a couple of minutes of soundtrack but your model will be loaded with a “This is the way” speech at the beginning, followed by the entire theme song, and ending with his famous line “I can bring you in warm….or I can bring you in cold”. As with all of my models, I can customize your soundtrack after you receive the model so you can truly make this piece one-of-a-kind.

I designed the model so the LED spotlights and the soundtrack are completely independent. Therefore you can turn on just one or the other. Or, if you want, you can play the soundtrack while the lights are on for the full effect!

This model is actually quite large. It stands a whopping 11″ high from the base to the tip of his gun. It’s very wide at 11″ wide and weighs a hefty 2 pounds! The entire Mando model is 3D printed using the latest SLA technology and 100% infill for maximum weight and durability. The base is 3D printed using FDM technology. ​​This is a truly unique collectible as it’s the only one of its kind that includes LED lights and a full soundtrack.

The model uses a 1100 mAh rechargeable battery for power. This battery was selected for its longevity so you can use the model wirelessly for a long period of time without recharging. It comes with a charging cable to plug into any AC outlet. There is a handy LED on the circuit board which remains green during charging and turns off when the battery is completely charged. This is why you can still see the green circuit board from the back.

All electronics are self contained and sealed inside the base which also houses a upward firing speaker for maximum sound clarity. You’ll be surprised how loud and clear the soundtrack is! The base houses the switch for the LED lights and the button for the soundtrack.

All of the gloss black and Beskar chrome colors are airbrushed. All other colors are meticulously hand painted with 2 coats on top of primer for maximum color effect.

This model is not a toy and should be treated as a collectible art piece. Since it is 3D printed, printing artifacts will be visible when viewed up close. This model consists of multiple individual pieces that are painstakingly glued together. Because 3D printed plastic expands at different rates, there will be small gaps when viewed up close. It should be considered to be extremely fragile.

I offer free curbside delivery in the Orlando area to get your model to you quicker and to reduce the risk of shipping damage. If not, this item will ship to the lower 48 states for free but with UPS Ground due to the size of the box.

**We package all of our items with extreme care but there is always the chance that they could get damaged due to improper carrier handling. Rest assured, the items are fully insured and we can resolve handling damage very quickly**

This item is not affiliated with the Disney Company in any way and it is considered fan art.

Please copy and paste this link to see this amazing package in action!

The brand new USB stick will come loaded with all of these shows in mp4 format ready for you to recreate some beautiful memories at home.

This listing includes:
*64GB USB flash drive preloaded with all firework and nighttime shows
*The following full nighttime shows:

“Illuminations” (17 mins:33 secs) – The best produced show in this package! The entire show is shot from a tripod in 4K from the dead center of World Showcase. The audio is complete, crystal clear source audio with crowd and fireworks sounds overlayed. You even get 4 minutes of post show audio while the famous torches and globe continue to glow. It’s an absolutely gorgeous show!

“Fantasmic!” (27 mins:32 secs) – The entire show was shot in 4K steadi-cam (with zoom) close to center stage! All of the audio is crystal clear source audio.

“Harmonious” (21 mins:29 secs) – The entire show was shot in 4K on a tripod at the entrance to World Showcase with nobody in front of the camera! All of the audio is crystal clear source audio!

“Star Wars: A Galactic Spectacular” (13 mins:15 secs ) – This was shot in 4k from a tripod almost in the center of the Chinese Theater! The soundtrack is the original recording from the camera so you get to hear all the fun crowd sounds too!

“Epcot Forever” (11 mins:15 secs) – The entire show was shot in 4K on a tripod with nobody in front of the camera! All of the audio is crystal clear source audio!

“Wonderful World of Animation” (12 mins: 14 secs) – This was shot in 4k from a tripod dead center of the Chinese Theater! The soundtrack is the original recording from the camera so you get to hear all the fun crowd sounds too!.

“Epcot Beacons of Magic: 40th Anniversary Edition” (4 mins: 13 secs) – This was shot in 4k from a tripod dead center in front of the beautiful new fountain! The soundtrack is crystal clear so you get to enjoy some fan favorite songs like “Listen to the Land”, “One Little Spark”, “We Go On”, etc.

“Tower of Terror Beacons of Magic: 50th Anniversary Edition plus Season’s Greetings!” (11 mins: 29 secs) – This was shot in 4k from a tripod dead center of the Chinese Theater! The soundtrack is the original recording from the camera so you get to hear all the fun crowd sounds too!

“Tree of Life Beacons of Magic: 50th Anniversary Edition plus Holiday Awakenings!” (16 mins: 28 secs) – This was shot in 4k from a tripod. The soundtrack is the original recording from the camera so you get to hear all the fun crowd sounds too!

***Contact me for a large discount if you want to purchase multiple fireworks shows at once!***

This item is not affiliated with the Disney Company in any way.

Please copy and paste this link to see this amazing package in action!

The brand new USB stick will come loaded with all of these shows in mp4 format ready for you to recreate some beautiful memories at home.

This listing includes:
*64GB USB flash drive preloaded with all shows
*The following full shows:

“Disneyland Forever” (19 mins: 11 secs) The best produced show in this package! All shots are in 4K and shot from multiple angles. This looks like a completely professional video! The audio is complete, crystal clear source audio dubbed over the show. This show includes a beautiful intro and a spectacular ending. After the show, you get 4 full minutes of gorgeous 4K video from around the park featuring attractions like Small World, Tea Cups, Monorail, Splash Mountain, etc. all while the fireworks ending music is playing. It’s an absolutely gorgeous show and you’ll want to play it over and over again!

“Remember Dreams Come True” (16 mins: 18 secs) – This show was shot in 4K with a handheld steadicam right in the center of the hub! The audio is complete, crystal clear source audio dubbed over the show. Please note there is a small watermark in the bottom right hand corner throughout the entire video but you forget it’s there once you are immersed in the show.

“Fantasmic!” (25 mins: 05 secs) – This entire show was shot in 4K on a tripod from center stage with no obstructions! The audio is complete, crystal clear source audio dubbed over the show.

“World of Color” (27 mins: 37 secs) – This entire show was shot in 4K on a tripod from the center of the lagoon with no obstructions! The audio is complete, crystal clear source audio dubbed over the show. It also includes 3 minutes of ambiance at the end of the show while the music continues to play.

“Believe in Holiday Magic” (10 mins: 23 secs) – This show was shot in HD with a handheld steadicam right in the center of the hub! The audio is live recorded audio so you can hear how much fun the guests are having!

“Halloween Screams” (12 mins: 15 secs) – This entire show was shot in 4K on a tripod from the center of the hub! The audio is live recorded audio so you can hear how much fun the guests are having!

This item is not affiliated with the Disney Company in any way.